Fresher pressure logo

Surface Care Guides

Straightforward, honest advice on caring for natural stone, tile, concrete, block paving, resin and tarmac — what actually works, and the common mistakes that cause lasting damage.

Get a Free Quote

How to Clean Limestone Without Damaging It

Limestone is soft and porous, so the wrong cleaner or too much pressure can etch or dull it permanently. Here's what actually works.

Read the Guide

Why Pressure Washing Can Ruin Sandstone

Sandstone looks tough, but a standard pressure washer set-up can strip its surface and speed up erosion. Here's why a gentler method matters.

Read the Guide

Should Porcelain Patios Be Sealed?

Porcelain is one of the least porous paving materials around, so does it actually need sealing? The honest answer, and where sealant still helps.

Read the Guide

Why Marble Loses Its Shine

Marble dulling over time isn't usually dirt — it's the surface itself being worn away. Here's what causes it and how it's fixed.

Read the Guide

How Often Should Natural Stone Be Resealed?

Sealant wears off gradually and invisibly, so a lot of homeowners find out too late. Here's a realistic resealing schedule by stone type.

Read the Guide

Steam Cleaning vs Diamond Polishing: What's the Difference?

Two very different processes that both come up when researching stone floor restoration. Here's what each one actually does.

Read the Guide

The Biggest Mistakes Homeowners Make Cleaning Stone

Most stone damage isn't caused by neglect — it's caused by well-meaning DIY cleaning that uses the wrong product or method.

Read the Guide

Cleaning Concrete and Mono Block Driveways

Poured concrete and mono block look similar once they are dirty, but they need different handling. Getting it wrong strips the surface or washes the joints out.

Read the Guide

How to Clean a Resin Bound Driveway

Resin is low maintenance, not no maintenance — and it is the surface most easily wrecked by an over-enthusiastic pressure washer.

Read the Guide

Cleaning Tarmac Without Damaging It

Tarmac is the surface most often ruined by cleaning. It is bitumen-bound, so heat and pressure attack the binder that holds it together.

Read the Guide

Latest From the Blog

Recent jobs, local write-ups and seasonal advice from Julian.

Read the Blog

Need a Hand Rather Than a How-To?

Call Julian on 07900 993535 or send a few photos over WhatsApp for a fast, no-obligation quote across West Sussex and East Sussex.